Wi-Fi
Use Wi-Fi to surf the Internet, download applications, or send and receive email. Once
you connect to a Wi-Fi network, your device remembers the network and automatically
connects to it the next time you come within range.
Some Wi-Fi networks require you to log in to a web page before you can get access.
Contact the relevant Wi-Fi network administrator for more information.
Available Wi-Fi networks may be open or secured:
•
Open networks are indicated by next to the Wi-Fi network name.
•
Secured networks are indicated by next to the Wi-Fi network name.
Some Wi-Fi networks do not show up in the list of available networks because they do not
broadcast their network name (SSID). If you know the network name, you can add it manually
to your list of available Wi-Fi networks.
To Turn Wi-Fi On or Off
1
From your
Home screen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Tap the slider to enable or disable Wi-Fi.
It may take a few seconds before Wi-Fi is enabled.
To Connect to a Wi-Fi Network Automatically
1
From your
Home screen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Tap the slider to turn on
Wi-Fi. All available Wi-Fi networks are displayed.
4
Tap a Wi-Fi network to connect to it. For secured networks, enter the relevant
password. is displayed in the status bar once you are connected.
To search for new available networks, tap , then tap
Refresh. If you cannot connect to a Wi-Fi
network successfully, refer to the relevant troubleshooting tips for your device at
www.sonymobile.com/support/
.
44
This is an internet version of this publication. © Print only for private use.
To Add a Wi-Fi Network Manually
1
From your Homescreen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Tap >
Add network.
4
Enter the
Network name (SSID) information.
5
To select a security type, tap the
Security field.
6
If required, enter a password.
7
To edit advanced options, such as proxy and IP settings, tap
Advanced options
and then edit the options as desired.
8
Tap
Save.
Contact your Wi-Fi network administrator to get the network SSID and password.
Increasing Wi-Fi Signal Strength
There are a number of things you can do to improve Wi-Fi reception:
•
Move your device closer to the Wi-Fi access point.
•
Move the Wi-Fi access point away from any potential obstructions or interference.
•
Don’t cover the Wi-Fi antenna area of your device (the highlighted area in the illustration).
Wi-Fi Settings
When you are connected to a Wi-Fi network or when there are Wi-Fi networks available
in your vicinity, you can view the status of these networks. You can also enable your
device to notify you whenever an open Wi-Fi network is detected.
To Enable Wi-Fi Network Notifications
1
Turn on Wi-Fi if it isn’t on already.
2
From your Homescreen, tap .
3
Find and tap
Settings > Wi-Fi.
4
Tap >
Advanced.
5
Drag the slider beside
Network notification to the right.
To View Detailed Information About a Connected Wi-Fi Network
1
From the Homescreen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Tap the Wi-Fi network you are currently connected to. Detailed network
information is displayed.
To Add a Wi-Fi Sleep Policy
1
From the Homescreen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Tap , then tap
Advanced > Keep Wi-Fi on during sleep.
4
Select an option.
45
This is an internet version of this publication. © Print only for private use.
To Find the MAC Address for Your Device
1
From the
Home screen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Tap . The
MAC address is displayed in the list.
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you
establish secure wireless network connections. If you have little background knowledge
of wireless security, WPS makes it easy for you to set up Wi-Fi Protected Access®
(WPA) encryption to secure your network. You can also add new devices to an existing
network without entering long passwords.
Use one of these methods to enable WPS:
•
Push button method – simply push a button on a WPS-supported device, for example, a
router.
•
PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS Button
1
From your Homescreen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Turn on Wi-Fi if it is not already on.
4
Tap >
Advanced > WPS Push Button, and then press the WPS button on the
WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS PIN
1
From your Homescreen, tap .
2
Find and tap
Settings > Wi-Fi.
3
Turn on Wi-Fi if it is not already on.
4
Tap >
Advanced > WPS PIN Entry.
5
On the WPS-supported device, enter the PIN that appears on your device.